Emergency Plumbing Services

Posts Tagged ‘Leaks’

How many nights have you spent up listening to the stubbornly demonic dripping of a leaky faucet? Contrary to popular belief, not all leaks are so complex that only a plumber is capable of fixing them. All that is really necessary is a simple visit to http://www.bpisite.com/. So how about we stop inviting that food-guzzling Tank you know as Joe over for dinner and quick pipe fix, and start with the basics.

Most leaky faucets are a simple 1-part fix. Turns out, this small part is probably the cheapest plumbing part (and repair-part in general) known to man. Lucky us! I am talking about the O-Ring. The small, rubber liquid-stopper we all place in, on, or around simple pipe fixtures to stop the flow of liquid. Because these pieces are made of rubber, they are usually the quickest to start failing. If you’ve recently moved into an apartment, or if you’ve had your faucet for a couple years, it is most likely this is the problem.

The repair process is unbelievably easy. I’m going to assume your faucet is a normal faucet, used for normal human things like washing and controlling the flow of water. If this is the case, then right at the tip of the spout is a small circular device called an Aerator. The first step is to unscrew and remove this device. On the inside, you should see a small, black rubber ring. Remove this ring and replace it with a new one. If necessary, take it into your local hardware or plumbing store just to make sure you get the right size. Once you have this replaced and fitting snugly within the aerator, simply screw it back on to your faucet and you’ll be leak free and sleeping soundly once again.

Mobile home park tenants use, on average, about $30 per month of water & sewer. In some parks, however, that amount can run around $100 per occupied lot. Whenever you become suspicious that your water is running too high, here are the steps to find out where the water is going and proactively solve the problem.

Install water meters and read them.

Even if you have no interest in billing back tenants for their actual use, there is no way to track where the water is going without measuring how much tenants use. This will help you identify if your usage problems are tied to just a few tenants who abuse the system. I once had a tenant who was spending $600 per month in water. How? He sneaked into the park a large commercial construction water truck, and filled it up with his hose every night. That one tenant was the entire source of my water problem, and I found him through sub-metering.

Compare the master meter reading to the individual lot aggregate.

Once you have the individual readings, you can now add them up and see if they are the same as your master reading, from the main meter that you get your bill from. The difference between these two readings is the amount of water leaking in your system. Most parks have a small amount of leakage, so don?t demand perfection. If, however, the difference is significant (say many thousands of gallons), you have a real problem.

Look for visual signs of leaks.

Before you put a lot of money into testing, see if you can find the leak yourself by walking the property and looking for signs of saturated land and tall, green grass. While this can also be caused by artesian wells and sewer line leakage, big-time saturation requires the kind of constant water pressure in line with a serious leak. Fix these leaks and see what the impact is to your readings.

If that fails, then hire a leak detection company.

It is amazing what a leak detection company can find. Don?t ask me how they do it, as I do not fully understand the science. But I have been the thankful recipient of their work. The world record was a leak that had no surfaced evidence of any type, but it was huge ? maybe 400,000 gallons per month. That would fill 20 commercial hotel swimming pools. In the end, it turned out to be a crime scene ? someone who had their house downstream on a creek had tapped into the park?s main line and run a line to the creek so that the babbling brook was running year round.

Once you find the leaks in the system, fix them.

Regardless of the cost, there is no way that you will be money ahead by letting them keep on leaking. The only exception is the natural, tiny leaks of a large system, caused by trace seepage in the connections.

Before you start evicting tenants for water use abuse, find out why it?s occurring.

One of the best things you can do when exploring where your water is going, is to hire a plumber to come out to the park at 10 am on a weekday, and take all the clean out covers off and listen for running water. Most lots will have none. But some will have Niagara falls going down the line ? even though nobody is home! Why? Because they have all kinds of leaks in their house. Toilet leaks, leaky faucets, you name it. I once had a tenant who left all of his taps running 24/7 because they were broken and he couldn?t turn them off. In these cases, you are better off having the plumber go to these tenants? houses and spend 30 minutes to fix their leaks, rather than evict them and try to find a new tenant. If you evict a tenant, you will have court costs, loss of income, and probably an outgo of cash as an incentive to bring in a new home. If you can fix the leaks for $100 you are much better off.

Conclusion

Water and sewer is the largest line item expense for most mobile home parks. That means that saving money on it is going to be the biggest savings you can make. Your park usage is not magic, it is just science. If you take these steps you can get a complete handle on where the water is going, and then take steps to reduce the usage. Always remember that, assuming a 10% cap rate, even an $80 per month savings increases the value of your park by nearly $10,000. And you should be able to save much, much more than that.